what transmissions will the 2013 f150 tranfer case bolt to

A transfer case is directly connected with the ability system of vehicles that have a iv-cycle system. Yes, It works like a gnaw when it comes to dividing the power between the important parts of your vehicle.

But the bad news is- sometimes, the transfer cases malfunction and result in some unwanted situations.

So, you must accept a crystal clear idea about the Ford F150 Transfer Case problems and how to solve them.

Luckily, yous are in the correct place because this commodity will cover the common problems, the reasons behind them, and the easiest way to troubleshoot them. Then, gear up to swoop in?

Table Of Contents

• one How Does a Ford F150 Transfer Instance Work?- Basic Agreement
• two A Quick Overview to Transfer Example Problems and The Reasons Backside Them
• iii Ford F150 Transfer Case Problems- Explained!
• 4 Problem-01: Transmission Fluid Leakage
  • 4.ane Things Y'all'll Need
  • 4.two Step 1: Raise Your Vehicle
  • 4.iii Step two: Get Rid of The Driveshaft
  • iv.4 Step 3: Install the New Seal
• 5 Problem-02: Pinholes on The Transfer Instance
  • v.1 Things Yous'll Demand
  • v.2 Footstep ane: Jack Upwardly Your Vehicle
  • 5.3 Step 2: Disassemble the Bolts
  • five.4 Stride 3: Disassemble the Front Shaft
  • 5.5 Stride 4: Have the Connector Autonomously
  • 5.6 Step 5: Remove the Pinnacle Role of the Transfer Case
  • 5.seven Step half-dozen: Install the New Case One-half
• 6 Problem-03: Damaged Encode Motor
  • half dozen.1 Things You'll Need
  • 6.two Step 1: Remove the Motor
  • 6.three Step 2: Utilize the Exam Light
• 7 Frequently Asked Questions(FAQs)
  • 7.one Can you drive with a broken transfer case?
  • vii.2 What happens when a transfer case goes bad?
  • vii.3 Tin can a bad transfer case cause vibration?
  • 7.4 What noise tin can a bad transfer make?
  • 7.5 Is the transfer case the same equally manual?
  • 7.6 A Helpful Tutorial For F150 Owners!
• 8 Determination

How Does a Ford F150 Transfer Case Work?- Basic Understanding

Earlier we delve into the problems, let's have a bones knowledge of the transfer case functionalities. It will permit you understand the malfunctions more than easily.

The main task that a transfer case does is to carve up the power between the front and the rear axles of your vehicle.

In the showtime place, the transfer example receives the power from the transmission, and and then sends the power to the rear axle.

Then, it divides the power between the rear beam and the front axle. This process offers more traction when your vehicle deals with snow, mud, and other slick surfaces.

And, when the vehicle needs to shift between the system modes (from 2WD to 4WD) to speed up, you tin can speed it upwards either manually or with a selector switch.

What the switch does here is, sends the ability to an electric transfer example shift motor which volition shift the transfer example from two-cycle bulldoze to 4-bicycle drive.

However, if you drive F-150 instead of the one-time versions similar F-250 or F-350, you volition always observe a switch on your dash for activating your 4WD ford.

Since we are washed with the surface level talks, nosotros can movement onto ford f-150 transfer case issues now.

A Quick Overview to Transfer Case Issues and The Reasons Backside Them

Issues	Reasons
Gear shifting issues, reddish type of fluid on the ground, humming noises from the engine compartment	Manual Fluid Leakage
Humming, rattling, or growling that changes with the speed of the vehicle.	Pinholes on the transfer case, a loose chain, bad bearings, damaged gears
Facing difficulty while staying in 4WD, 4wd not engaging or disengaging, embarrassing noise	Damaged encode motor

Ford F150 Transfer Case Problems- Explained!

We volition talk over here the most common reasons behind the bug and how y'all tin can solve them using DIY hacks.

Problem-01: Transmission Fluid Leakage

Leaks are one of the culprits that pb yous to have a problematic transfer case.

But how tin yous determine that your ford is facing aught just transmission fluid leakage? Here are some symptoms that indicate a depression fluid level.

• Gear shifting issues
• Reddish type of fluid on the footing
• Humming noises from the engine compartment

In these cases, you can exist sure that at that place's a trouble with the fluid level. However, humming dissonance tin can too occur for other mechanical problems (pin it for after, we'll discuss it in detail).

At present, you may exist curious near how things piece of work here.

Well, you volition discover a seal in the transfer case that prevents the manual fluid from spilling and creating a mess. But the problem arises when this seal doesn't work properly. This fluid won't transmit where information technology'south needed to. It may consequence in a problematic transfer case.

Withal, when you're in dubiousness about leakage, you must exist certain most it. To be so, these are the very first steps you should take:

• To heighten your vehicle, use a floor jack & jack stands
• Find the transmission case by crawling underneath your machine
• Take a container and identify it underneath the fill plugs
• Pull the make full plugs

At present, notice if the liquid is coming out. If you lot encounter it coming out, and so the bad news is, the transmission doesn't work anymore which leads the manual fluid to come up out.

To gear up this irritating issue, you need to replace the seal inside your transfer example. Just hey, it's just the opposite of how complicated you recollect information technology is. Here you go with an piece of cake explanation to do the chore.

Things You'll Need

Manage the things below before you go started.

• A floor jack & jack stands to heighten your vehicle
• An bear upon gun for taking apart the bolts on the driveshaft
• A rag for wiping off the residue inside when you'll pull out the seal
• A hammer to remove the seal
• RTV and oil to install a seal
• A marking to mark the ways to where everything goes

Step 1: Raise Your Vehicle

Jacking upwards the vehicle will make everything piece of cake to manage when you'll piece of work on the transfer case.

So, get-go thing get-go, heighten your vehicle and get underneath it. Stay there and put the vehicle in neutral as you can turn the driveshaft. Now, use a marker for drawing a line on the driveshaft. It will make it easy when yous'll put it dorsum on.

Step 2: Go Rid of The Driveshaft

It'south time to remove the driveshaft too as practise some cleaning.

Concur the driveshaft and remove the bolts using the bear upon gun. One time y'all're washed removing the driveshaft, carefully pull the seal out using a screwdriver.

Later that, place the screwdriver on the seal's backside and so, use a hammer to tap the screwdriver. Clean within properly to get rid of the bulk within.

Stride 3: Install the New Seal

The last step is to install the new seal.

There's a safety part inside every transfer case. Yous demand to add oil to that rubber part first. And so, go for the metal office and add some RTV to it. Put the seal inside carefully and utilize a hammer to hit it until it's perfectly attached inside.

Once washed, put your driveshaft dorsum on.

So, y'all have solved one type of issue with the transfer case. Permit's move on to the other types.

Problem-02: Pinholes on The Transfer Case

The reason which we should exist concerned about the most is the pinholes on the transfer instance. About the rest, you lot tin simply collect rebuild kits that containing a new chain and the front one-half of the case.

And so, replace the front case and the concatenation. Merely this job should be covered by a professional instead of a DIY person.

So, let's get back to the pinholes function. We can fix them with our DIY hacks.

There is a fluid pump inside your transfer example and information technology moves continuously to continue things normal. Just if you lot hear a humming or rattling noise from the transfer instance, things are not normal. If this is the situation, replace the half case.

Finding the holes are generally easy considering they are institute on the top of the transfer case most times. However, sometimes, you lot may need some more than fourth dimension to find the holes. So, examine advisedly.

Once yous are certain that you need to supercede the example half because y'all've found the holes, let'south run into what's the solution.

Things Yous'll Demand

These tools are needed for the job:

• Flathead screwdriver to release one tab
• Pry bars for taking the case half out
• A floor jack & jack stands to jack up your vehicle
• A hammer to pull things out
• A bucket to avoid any mess related to spills
• Impact gun or 10mm, 18mm, 19mm wrench to remove the bolts
• A 15mm socket to remove i specific bolt of the transfer case

Footstep 1: Jack Upwardly Your Vehicle

Every bit e'er, brand things easier for you by raising your vehicle with a floor jack and jack stands. Afterwards that, observe carefully where the transfer instance is. Then, place the bucket nether the fill up plugs.

Step ii: Disassemble the Bolts

The outset matter you're asked to practise is to disconnect the battery. Then, put your vehicle in neutral. After that, employ an touch gun and go rid of the bolts from the driveshaft.

Now, it's time to get rid of the transmission cross fellow member of your vehicle. You should remove the nuts first and then the bolts from each side of the transmission.

Footstep 3: Disassemble the Front Shaft

Get-go the third step by removing the front driveshaft. Take the bolts out with a wrench and then pull off the transmission mountain.

Footstep 4: Accept the Connector Apart

The connector we want y'all to remove operates the encoded motor of your vehicle. The motor lets you switch from 2WD to 4WD.

Since you accept access to the electric motor, utilise a flathead screwdriver for releasing the tab. And then, become rid of the tube and nuts that keep the transfer case attached.

Stride v: Remove the Superlative Part of the Transfer Example

Start past removing the snap band grommet from your transfer case. Take the output shaft speed sensor apart using a 19mm wrench. There, you lot'll notice the factory drain plugins, remove them with an 18mm wrench.

Next, remove all the bolts from your transfer case using a 10mm socket. As we said earlier, you'll need a 15mm socket for removing the terminal bolt. At present, pull out the transfer instance using pry bars.

When you pull out the top, put the flathead screwdriver inside the speed sensor hole and lift it up. At present, you can hands take off the top of your transfer case.

Step 6: Install the New Case Half

Take the new case and place it over the new shaft. Then, line it upward on the dowels. While lining it up, be sure it's squishing down perfectly. Next, tap on the case with a hammer.

Utilize the pliers and the flathead screwdriver for locking the new case half. Then, reinstall the example bolts and the brackets. Tighten down all the bolts and reinstall the drain plugs. Supersede the speed sensor and so.

Before you install the shaft ring grommet, make sure yous have installed the bearing correctly.

This is it. Let'due south run across what the next problem is.

Problem-03: Damaged Encode Motor

As we said before, the shift motor helps your vehicle to switch backward and forward between 2WD and 4WD modes. To continue things normal, the motor must work properly. But if it fails, issues like difficulty staying in 4WD, 4WD not engaging, or disengaging may occur.

So, it'due south important to examine the motor and if there's any problem, replace it.

If you were wondering how to test the transfer case shift motor, here you lot go.

Things You'll Need

• Jack up stands
• Touch on gun
• A test lite (Ohm would be preferable)

Stride ane: Remove the Motor

First thing first, jacks upward the vehicle using jack stands. Await for the transfer example motor. You will detect it easily because it'due south similar to a window motor and it's plant on the rear of the transfer instance.

You lot volition notice that there are iii to 4 bolts holding the motor. Use an impact gun and remove the bolts. After that, unplug the wiring connectors.

Finally, remove the motor and get ready to carry out the exam.

Step 2: Employ the Test Light

Look closely at the actuator and encounter where the xanthous and orange wires are. These ii wires are supposed to go into the motor. Now, set up the volt of your Ohm to 200 ohms. Put the probes on the yellow and the orange wires.

In that location should be a result somewhere between 2.two and 2.7. Otherwise, the shift motor is faulty.

If you are having a damaged motor, you should go for a new one. Since the motor is the life of the transfer example, no take a chance should exist left here.

So, we are done talking near the reasons behind the most mutual Ford F150 transfer case problems. Simply in case you couldn't notice here the exact issue you're facing for your transfer case, and so y'all may need to replace your transfer case in no time.

Oftentimes Asked Questions(FAQs)

Tin you drive with a broken transfer example?

Yes, you tin can bulldoze with a broken transfer instance. But you can't utilise your vehicle every bit a 4WD, it would be a 2WD vehicle. Nevertheless, nosotros don't recommend driving with a broken transfer example as there are chances to damage the vehicle.

What happens when a transfer case goes bad?

You cannot apply the 4WD (four-wheel drive) when your transfer example goes bad. You may inquire 'what about 2WD?'. Well, you can bulldoze in 2WD but we don't recommend it considering it's quite dangerous.

Tin a bad transfer example crusade vibration?

Yes, a bad transfer case tin can crusade excessive vibration.

What noise can a bad transfer brand?

A bad transfer tin make a grinding racket when yous switch from 2WD to 4WD.

Is the transfer case the same every bit transmission?

No it's not. Transmission is the ability supplier of the transfer case.

A Helpful Tutorial For F150 Owners!

Conclusion

Cheers for even so being with us! Since we tried our best to cover the Ford F150 transfer case bug along with the useful solutions, hopefully, you've got your desired information from here.

And so, go and fix the trouble you've been facing with your transfer case. Adept luck!

Y'all Can As well Read:

• How to Make clean My Ford Touch Screen
• How to Use ForScan F150 ­– Complete Guide For F150 Owner!
• Driving with Bad Cam Phasers? Meet How to Placidity Cam Phaser Noise Easily
•  Ford F150 Radio Not Working at All – Here's How To Set up Properly!

hollidaythoreeduck1994.blogspot.com

Source: https://www.automasterx.com/ford-f150-transfer-case-problems/

Share this post